某500强制造业
ME工程师-越南-NPI方向-Rena负责
制造业
设备管理
越南
经验不限
本科
面议
职位描述
ME（NPI）
Manufacturing Engineer (NPI)
岗位概述｜Position Summary
负责NPI项目的设备及治具导入、试产支持和爬产改善，协调供应商及内部团队完成设备准备，解决现场制造问题，推动新产品效率、良率及产能提升。
Responsible for equipment and fixture introduction, trial production support, and production ramp-up improvement for NPI projects. Coordinate suppliers and internal teams to ensure equipment readiness, resolve manufacturing issues on the production floor, and improve production efficiency, yield, and capacity for new products.
岗位职责｜Key Responsibilities
1. 设备及治具方案审核｜Equipment and Fixture Proposal Review
根据产品图纸、工艺要求及产能需求，审核供应商提供的设备和治具方案，评估方案的适用性、操作便利性及生产稳定性，推动技术问题确认和方案完善。
Review supplier proposals for equipment and fixtures against product drawings, process requirements, and capacity needs. Assess suitability, ease of operation, and production stability, and drive technical clarification and proposal improvements.
2. 设备导入全过程推进｜End-to-End Equipment Introduction
协调设备采购、运输、场地准备、安装架设、调试及验收，跟进各阶段进度和异常，确保设备准备满足项目试产及爬产计划。
Coordinate equipment procurement, transportation, site preparation, installation, commissioning, and acceptance. Track progress and resolve issues at each stage to ensure equipment readiness meets trial production and ramp-up schedules.
3. 设备资料及配置审核｜Equipment Documentation and Configuration Review
阅读并审核设备BOM、设备清单和相关技术资料，确认设备配置与项目需求的一致性，跟进缺失项、差异项及技术问题的关闭。
Read and review equipment bills of materials (BOMs), equipment lists, and related technical documentation. Verify that equipment configurations meet project requirements and follow through on missing items, discrepancies, and technical issues until closure.
4. 图纸、BOM及工程变更落实｜Drawing and BOM Review and Engineering Change Implementation
参与产品图纸、BOM和制造要求审核，识别设备及制造相关风险；评估工程变更对设备、治具和制造过程的影响，推动现场落实并验证效果。
Participate in reviews of product drawings, BOMs, and manufacturing requirements to identify equipment and manufacturing risks. Assess the impact of engineering changes on equipment, fixtures, and manufacturing processes, and drive implementation and effectiveness verification on the production floor.
5. 试产准备与现场问题解决｜Trial Production Readiness and On-Site Problem Solving
确认设备及治具的试产准备状态，组织设备和制造相关的试产验证，分析设备运行、工艺参数及操作过程中的问题，协调供应商和内部团队实施改善。
Verify equipment and fixture readiness for trial production and coordinate equipment and manufacturing validation during trial runs. Analyze issues related to equipment operation, process parameters, and production activities, and coordinate improvements with suppliers and internal teams.
6. 爬产效率及良率提升｜Ramp-Up Efficiency and Yield Improvement
深入生产现场，结合CT、产出、良率及异常数据识别瓶颈，通过设备优化、参数调整和操作改善，推动生产效率、良率及产能快速提升。
Work closely with production teams on the shop floor to identify bottlenecks using cycle time (CT), output, yield, and production issue data. Drive rapid improvements in efficiency, yield, and capacity through equipment optimization, parameter adjustments, and operational improvements.
7. 现场技术指导与量产衔接｜On-Site Technical Guidance and Mass Production Handover
指导量产工程师及生产人员掌握设备操作、关键参数和异常处理方法，传递试产及爬产阶段的改善成果，支持设备及制造工作的量产移交。
Provide technical guidance to mass production engineers and production personnel on equipment operation, critical parameters, and troubleshooting. Transfer improvements and lessons learned from trial production and ramp-up to support the handover of equipment and manufacturing activities to mass production.
职位要求
任职要求｜Qualifications
具备5年以上工作经验，有工厂或设备供应商工作经历者优先。
At least 5 years of work experience, preferably in a factory environment or with an equipment supplier.
具备设备导入、安装调试、试产支持或现场制造改善经验，能够推进设备从方案确认到生产应用的相关工作。
Experience in equipment introduction, installation and commissioning, trial production support, or shop-floor manufacturing improvement, with the ability to drive equipment-related activities from proposal confirmation through production deployment.
能够理解产品图纸和制造要求，审核设备及治具方案，读懂设备BOM、设备清单和相关技术资料。
Ability to interpret product drawings and manufacturing requirements, review equipment and fixture proposals, and understand equipment BOMs, equipment lists, and related technical documentation.
了解设备采购、运输、场地准备、安装架设及验收等环节，能够识别关键准备事项并协调资源落实。
Understanding of equipment procurement, transportation, site preparation, installation, and acceptance, with the ability to identify key readiness requirements and coordinate resources for execution.
具备较强的现场问题分析能力，能够结合设备状态、工艺参数和生产数据定位问题，制定并验证改善措施。
Strong hands-on problem-solving skills, with the ability to identify root causes using equipment conditions, process parameters, and production data, and to develop and validate corrective actions.
具备效率、良率及产能改善经验，能够指导工程和生产人员落实现场改善。
Experience in improving production efficiency, yield, and capacity, with the ability to guide engineering and production personnel in implementing shop-floor improvements.
具备良好的供应商沟通、跨部门协调及执行能力，能够持续跟进问题直至关闭。
Strong supplier communication, cross-functional coordination, and execution skills, with consistent follow-through to issue closure.
具备英语能力者优先。
English proficiency is preferred.
分享